Polaris' options
Each application requires customization dedicated to provide the best performance and easier installation.
The versatility of products and attention to customer needs, have led us to develop over the years a wide variety of options. Below an extract of the main options.
Contact us to choose the best options for your application.
Sensitivity regulation
It is necessary for detection near to the limit of the resolution or for detection of transparent object.The regulation can be on front of the emitter endcup SEa or on bottom SEb.
SEa
Front sensitivity regulation
SEb
Bottom sensitivity regulation
Connection
Different connections are available to meet many installation requirements.
M12C - M12 4-5 poles, interconnection C style
The receiver is connected to the cabinet through M12 male, 4 or 5 poles.
The Rx – Tx interconnection is made with 2 C type connector.
The interconnection can ring the installation.
This is the most flexible solution.
8M12 - Connettore M12 8 poli RX + Connettore M12 4 poli TX
Connection through M12 8 poles male connectr on the receiver, and M12 4 poles male on the emitter.
M12CExx - Connettore M12 4-5 poli + cavo tipo C
The receiver is connected to the cabinet through M12 male, 4 or 5 poles.
The Rx – Tx interconnection is made with a cable of xx centimetres of length with C type connector.
Is the optimal solution for equipment assembled on machines produced in series and for small distances between Tx and Rx.
Optics
PR - Reduced range
Range less than minimum standard range
Lx - Long range
Extra range of maximum x meters
TR - Enanched optics
It is necessary when the object dimensions are near to detection limits, and also for detection of transparent object.
Additional protection
The protections are necessary in heavy applications.
The external protection in polycarbonate is suggest for occasional strong impact.
The glass external protection is suggested for frequently low impact, or for frequent cleaning of the barrier with abrasive cloth or solvent.
PE - External polycarbonate protection
Couple of external protection in polycarbonate, suggested for occasional strong impact
VE - External glass protection
Couple of external protection in glass,
is suggested for frequently low impact, or for frequent cleaning of the barrier.
V - Glass window protection
Suitable for frequent cleaning with abrasive methods that will damage the polycarbonate,
or if mounted near to UV lamp, used normally in the painting plant.
Fixing supports
KPL-02 - Kit of 4 supports
For side / rear mounting.
Recommended for barrier height greater than 500mm.
